malla de filtro de acero inoxidable

$1-10 /Square Meter

Tipo de Pago:	T/T,L/C
Incoterm:	FOB,CFR,CIF
Cantidad de pedido mínima:	100 Square Meter
transporte:	Ocean,Land,Air
Hafen:	TIANJIN

Contactar ahora

Descripción

Atributos del producto

Embalaje y entrega

Descripción

Atributos del producto

Modelo: SY-SS006

Marca: Shuangyou

Material: CABLE DE ACERO INOXIDABLE

Especies: Tela de alambre, Tejido de malla de alambre

Solicitud: Filtros

Estilo De Tejido: Tejido liso, Tejido de sarga, Tejido holandés

Proceso De Producción: Tejido

Lugar De Origen: porcelana

Embalaje y entrega

Unidades de venta	:	Square Meter
Tipo de paquete	:	Caso de cine y madera
Ejemplo de una imagen	:

Descripción

malla de filtro de acero inoxidable está hecho de alambre de acero inoxidable a través de la urdimbre y la trama tejida. Se utiliza principalmente para la filtración y detección de gas, líquido y la separación de medios, etc. Con resistencia a ácido, álcali, alta temperatura y rutina, se usa ampliamente en industrias como petróleo, petroquímico, automotriz, nueva energía, alimentos, farmacia y otros. Según el tipo de apertura y el tipo de tejido, la malla de filtro de acero inoxidable tiene: tejido liso, tejido de sarga, tejido holandés simple, tejido holandés y tejido riberado.

Los principales patrones de tejido aplicados incluyen tejido liso, tejido de sarga, tejido holandés o tejido de sarga holandesa.

The Plain Weave is the most commonly used and simplest wire cloth weave. Each warp wire (wire running-parallel to length of cloth) passes alternately over and under the wires running traversely through the cloth (fill or shoot wires) at 90 degree angles. It has an extremely wide range of applications.

The Dutch Weave is produced by the use of coarse mesh in the warp and a fine mesh with relatively smaller wire in the fill. This weave results in greater strength with very fine openings and is primarily used as a filter cloth. The shape and position of the openings aid particle retention and increase filter cake formation.

The Twilled Weave is produced by passing each fill wire alternately over and under two warp wires. The pattern is staggered on successive warp wires, giving the appearance of parallel diagonal lines. This weave allows the use of proportionately heavier wires in a particular mesh count (number of openings per lineal inch) than is possible in plain weave. This cloth has a wide application capable of supporting greater loads and finer filtrations.

The Twilled Dutch Weave is produced by a combination of the features of the Dutch Weave and the Twilled Weave. Fill wires are passed alternately over and under two warp wires forming a fine mesh in one direction and a coarse mesh in the other. This type of weave is capable of supporting greater loads than the Dutch Weave, with finer openings than the Twilled Weave. It is used in applications where the filtering of heavy material is necessary.

Mala de alambre de acero inoxidable ampliamente utilizada en la industria minera, la industria petroquímica, la industria de la creación de papel, la industria alimentaria y la industria farmacéutica de la industria. Para el filtrado y la detección debido a las características de la resistencia al desgaste, resistente al calor, resistente al ácido y resisten a la corrosión.

Podemos suministrar diferentes materiales SUS304, 304L, 316, 316L u otro material de acuerdo con las necesidades de los clientes.

El ancho normalmente para 3feet, 1m, 4feet, 5feet, máximo ancho 4.5m.

Mesh/Inch	Wire Diameter		Aperture		Open Area	Weight(LB)/ 100 Square Foot
Mesh/Inch	Inch	MM	Inch	MM	Open Area	Weight(LB)/ 100 Square Foot
1x1	.080	2.03	.920	23.37	84.6	41.1
2X2	.063	1.60	.437	11.10	76.4	51.2
3X3	.054	1.37	.279	7.09	70.1	56.7
4X4	.063	1.60	.187	4.75	56.0	104.8
4X4	.047	1.19	.203	5.16	65.9	57.6
5X5	.041	1.04	.159	4.04	63.2	54.9
6X6	.035	.89	.132	3.35	62.7	48.1
8X8	.028	.71	.097	2.46	60.2	41.1
10X10	.020	.51	.080	2.03	64.0	26.1
12X12	.023	.584	.060	1.52	51.8	42.2
14X14	.020	.508	.051	1.30	51.0	37.2
16X16	.018	.457	.0445	1.13	50.7	34.5
18X18	.017	.432	.0386	.98	48.3	34.8
20X20	.020	.508	.0300	.76	36.0	55.2
24X24	.014	.356	.0277	.70	44.2	31.8
30X30	.013	.330	.0203	.52	37.1	34.8
35X35	.011	.279	.0176	.45	37.9	29.0
40X40	.010	.254	.0150	.38	36.0	27.6
50X50	.008	.203	.0120	.31	36.0	22.1
60X60	.007	.178	.0097	.25	33.9	20.4
70X70	.0065	.165	.0078	.20	29.8	20.8
80X80	.0065	.165	.0060	.15	23.0	23.2
90X90	.005	.127	.0061	.16	30.1	15.8
100X100	.004	.102	.0060	.15	36.0	11.0
120X120	.0037	.0940	.0064	.1168	30.7	11.6
150X150	.0026	.0660	.0041	.1041	37.4	7.1
160X160	.0025	.0635	.0038	.0965	36.4	5.94
180X180	.0023	.0584	.0033	.0838	34.7	6.7
200X200	.0021	.0533	.0029	.0737	33.6	6.2
250X250	.0016	.0406	.0024	.0610	36.0	4.4
270X270	.0016	.0406	.0021	.0533	32.2	4.7
300X300	.0051	.0381	.0018	.0457	29.7	3.04
325X325	.0014	.0356	.0017	.0432	30.0	4.40
400X400	.0010	.0254	.0015	.370	36.0	3.3
500X500	.0010	.0254	.0010	.0254	25.0	3.8